Project Description

service_equipment/sonar_60

A6506 SONAR 60

ULTRASONIC CLEANER

Ultrasonic cleaner with full stainless steel housing ideal to perform cleaning and degreasing operations and for accurate finishing of the most disparate materials.
The ultrasonic cleaning has proved extremely efficient for the cleaning of ferrous and nonferrous metals, glass, ceramics, synthetic materials resistant to alkali, rubber, plastics. It represents the most agressive, rapid and cheap system to remove oils, grease, chips, filings, machining residues and dust particles from complex shapes (especially in interstices and hollow bodies hard to reach with different systems) both during the production and the maintenance stage (highly versatile and most useful for the finishing of elements produced with 3D printing).
Different materials or metals must not be put in the same cleaning cycle.
After every treatment it is recommended to rinse accurately every object.
In addition the elements must not be placed on the bottom of the tank. To comply with this restriction a wide range of accessories, basket, beaker and hooks are available.
The working cycle under pulse mode can be adjusted by a timer and the liquid used to transmit the high frequency waves is heated up for highest efficiency.

CHARACTERISTICS

Tank useful volume of 6.2 liters with exhaust cock and lid
Number of transducers: 2 with peak power of 300W
Ultrasound frequency: 26 kHz
Max temperature: 80° C
Resistance power: 500W
Timer: 1-25 min
Max absorbed power: 800W
Tank useful size: mm 300x500x170h
Overall dimensions: mm 375x190x330h

DOCUMENTS

USER MANUAL
TECHNICAL DATA SHEET
CE DECLARATION OF CONFORMITY

  

app servizio sonar

MORE PICTURES