Project Description

intro vg
intro vg vert

photopol/A5408V_vacuum_gas

A5408V PHOTOPOL “VACUUM+GAS”

PHOTOPOL VACUUM+GAS (A5408V) is equipped with 6 special circuits (8-LEDs Hi-Power SMD, 48 LEDs in total) with optical reflectors, developed to maximize the irradiation effect. The operating spectrum allows to post-cure components created with 3D printers working both 385nm and 405nm wavelenghts. It features a Touch-Screen Full-Color display to select parameters and to store programs. All curing cycles can be performed under vacuum (a powerful but small oil-less pump is built-in) and the unit can be connected to an external protective gas appliance (Nitrogen N2) to comply with the existing Medical Device Regulations for Class IIa certified materials. The “Vacuum+Gas System” allows to flow into the working chamber only a fixed quantity of Nitrogen (1.5 litres per cycle) with an impressive very low gas consumption.

TECHNICAL FEATURES

VACUUM+GAS System: to comply with the MDR for Class IIa 3D resins
DIGITAL: Software controls and Touch-Screen Full-Color Display
Curing Treatment Area: useful area diameter 135mm x h/80mm
Circuits / LEDs: 6×8 (48 LEDs) – equipped with special ALANOD reflectors
Wavelengh: Spectum 350nm-450nm (specific for 3D printing resins)
Voltage: 230V – 50/60Hz (different voltages available)
Absorption: 500W
External dimensions: mm 400x400x240H
Weight: Net 15kg – Gross 17kg

DOCUMENTS

USER MANUAL
TECHNICAL DATA SHEET
CE DECLARATION OF CONFORMITY

  

photopol

CONTACT US

Fill in the form below to get in contact with us.
You can also use our email [email protected] and follow us on Facebook/Twitter/Instagram.